Dewalt DCS520NT 54V XR Flexvolt 55mm Plunge Saw 2500-4200rpm 4.7kg Bare Unit In T-Stak

Dewalt DCS520NT 54V XR Flexvolt 55mm Plunge Saw 2500-4200rpm 4.7kg Bare Unit In T-Stak

The DeWALT DCS520NT is part of the 54 volt XR Flexvolt system providing the user with mains electricity power without the cord. Parallel plunge allows the user to maintain a smooth and constant hand position while cutting. 

54 volt XR Flexvolt system giving the power of the cord, without the cord
Parallel plunge allows the user to maintain a smooth and constant hand position while cutting
A 42 tooth blade gives a fine and accurate finish with very little breakout in laminates
Rail adjustment allows the saw to be adjusted accurately to the rail
The anti-kickback function stops the saw from moving backwards along the rail and helps stop the saw from climbing out of the work piece when making plunge cuts
Variable speed allows the correct speed to be set for different types of materials
The enclosed guard gives a 90 percent dust extraction capability
55 mm depth of cut allows the trimming and sizing of most common door sizes

Product Specifications

Battery Voltage: 54 volt
Blade Diameter: 165 mm
Blade Bore: 20 mm
Bevel Capacity: 47 degree
Hand/Arm Vibration: 1.1 m/s²
Maximum Depth of Cut (90 degrees): 59 mm
Maximum Depth of Cut (90 degrees with guide rails): 55 mm
Maximum Depth of Cut (45 degrees): 44 mm
Maximum Depth of Cut (40 degrees with guide rails): 40 mm
No-Load Speed (Low): 0 - 2500 rpm
No-Load Speed (Med): 0 - 4200 rpm
Sound Power Level: 93.2 dB(A)
Sound Power Uncertainty: 2.9 dB(A)
Sound Pressure Level: 82.2 dB(A)
Sound Pressure Uncertainty: 2.9 dB(A)
Uncertainty K 1 (Vibration): 1.5 m/s²
Length: 303 mm
Height: 265 mm
Weight: 4.7 kg