Soudal 161094 Soundabond Easy Gun Grade Fast Fix Heavy Duty PU Adhesive DuraValve Orange 750ml
Soudabond EASY is a high performance polyurethane adhesive foam. Quick and easy to use - no mixing required. Replaces traditional powder based adhesives. The formula combines strong adhesion with filling characteristics, making it suitable for bonding uneven surfaces. Used for the bonding of many building materials, such as insulation panels, plasterboard and the construction of interior walls using lightweight building blocks.
Featured properties
Ready to use, does not require mixing
Quick drying, can be worked after 1 hour
Thermal and acoustic insulation
Not UV resistant
Solvent-free - Reduced working time up to 30 %
High initial adhesion - even at low temperatures
Economical to use, because it is precisely dosed
Also suitable for vertical bonding
Shapeable from a box temperature of +5 ° C or an ambient temperature of -5 ° C
Thermal conductivity of 0.035 W/(m.K) for an ideal addition to the insulating panels when filling the joints
Flexible and non-brittle
Equalizes irregularities optimally
Huge reduction in weight and space compared to conventional PU adhesives, cement-adhesives etc ...
Insensitive to aging, rot-proof, resistant to months Water resistant (but not waterproof).
Instructions
Wear safety goggles. Ensure there is sufficient ventilation and keep away from flames. Make sure surfaces are clean and free of grease and dust. Spraying water on the surfaces will improve adhesion and speed up curing. Shake can vigorously for 30 seconds. Repeat regularly for maximum yield. Use upside down. Point nozzle and press trigger. Amount of trigger pressure defines speed at which foam extrudes. Apply PU Adhesive according to application, as per the technical data sheet. Apply in a zig-zag pattern onto one of the surfaces to be bonded. Wait until the foam becomes sufficiently tacky; i.e. thread is formed between gloved finger and adhesive when briefly touching adhesive (usually about 4 minutes depending on conditions). Then press materials firmly together for 30-60 seconds. Leave to cure for at least 1 hour before applying loads. Store can upright in dry conditions between +5°C and +25°C.
